Meyer Sound galileo 616 Creating a Custom Summing Matrix, Resetting Matrix Values

COMPASS USER GUIDE

3.For each input that is to be routed to an output, click the crossover point to select unity gain. Input signal will be routed to the output channel at unity gain.

Crossover points may still be assigned an arbitrary crossover attenuation value. Click inside the crosspoint value box and type a new value, then press ‹ Enter › to set the value.

Creating a Custom Summing Matrix

The greatest power of the matrix is its ability to route an input channel to several output channels simultaneously at varying signal levels, combining sources and helping diminish sound localization.

1.Select the [Galileo Unit] > Summing Matrix page.

2.Clear Router Mode, located at the top left of the page.

3.For each input that is to be routed to an output, assign an attenuation value to the crosspoint. You may adjust the level of the combined signal using the Output Masters controls, while adjusting the relative level of each input source using the Summing Matrix controls in the output channel column.

Resetting Matrix Values

1.Right-click on a crossover point: either the crossover point you wish to reset, a crossover point on a row you wish to reset, or on any crossover point if you want to reset the entire matrix. The Clipboard Options and Saved Settings window will be displayed.

2.Select the appropriate Reset. The button row labeled Matrix Gain corresponds to the specific crossover point, Matrix Input Row to the row, and Summing Matrix to the entire matrix.

NOTE: Channel selects and global Galileo linking can result in other matrix controls also being reset. The Clipboard Options and Saved Settings window provides a list of linked Galileos and channels.

31