Meyer Sound galileo 616 operating instructions Startup Galileo Discovery and Connection Options

COMPASS USER GUIDE

When cleared, pressing ‹ Enter › after typing a value sets the value and then places the cursor at the end of the value.

Show Meter Values

Select to display numeric value read-out to meters. Clear to have analog meters only.

Individual meters can be toggled to show or hide the meter value by using Alt+click on the meter display.

Startup Galileo Discovery and Connection Options:

These options control the behavior of Compass when it is started:

Find available Galileos on startup

Select to search the primary network for Galileo 616 units when Compass is started, displaying them on the Galileos tab.

When cleared, Galileos are discovered only when Find Galileos is clicked.

Relaunch and reconnect to previously connected Virtual Galileos on startup

Remembers which Galileo units were being used in Virtual Galileo mode, restarting them in the same mode the next time Compass is started.

Reconnect to previously connected Galileos on startup

Remembers which Galileo units were connected, restarting them in the same mode the next time Compass is started.

Default Delay Units

Sets the measurement unit for delay values.

Galileos that are already connected will continue to use the old measurement unit unless Set All Galileos To Default Units is clicked. Existing delay values will be converted from the previous measurement unit to the new unit.

Equalization Bypass on System Map is read-only

Disables EQ Enabled/EQ Bypassed buttons on connected Galileo Galileo Map pages. Enabling and disabling EQ is always available using the Equalization Enabled/Equalization Bypassed button on the appropriate Processing page.

75