containmany snapshots. Snapshots capture the state of all controls, not just those that are on
a particular Galileo unit sub-page. Recalling a snapshot instantly sets the controlsand system
settings to the saved values.
Atthe bottom of Galileo unit sub-pages is a set of snapshot and project control buttons. These
replicateimportant functionality found on the Project sub-page. Except where noted, the
following instructions assume use of this set of controls.
Snapshots
Creating a Snapshot
Using the controlsat the bottom of any Galileo sub-page:
1. Click Create.The Create New Snapshot window will be displayed.
2. Providea name for the snapshot and, if
desired,a descriptive comment.
The new snapshot will be listed on the [Galileo
Unit] > Project page, in the Snapshot Library.
Recalling a Snapshot
1. Select the [Galileo Unit] > Project page.
2. Fromthe Snapshot Library, select the desired snapshot.
3. In the Snapshot Library controlset, click Recall (there are two recall buttons; the other
is in the Boot Snapshot controlset.)
All controlvalues for the Galileo unit will be changed to match those that were captured in the
snapshot.
62
CHAPTER3: USING COMPASS TOOLS