Meyer Sound galileo 616 Using Shortcuts, Linking Settings Between Stereo Pairs

CHAPTER 3: USING COMPASS TOOLS

Using Shortcuts

To facilitate rapid Compass configuration a number of shortcuts are available:

Linking Settings Between Stereo Pairs

Assuming that neither channel of a stereo pair is isolated, a stereo pair of control values can be adjusted simultaneously:

■When using the mouse, hold the ‹ Shift › key when dragging or clicking a control.

■When using the keyboard, use ‹ Shift+Enter › to set the value after typing it.

Linking Settings for All Channels on a Galileo Unit

A control value can be set for all non-isolated channels simultaneously:

■When using the mouse, hold ‹ Shift+Cmd › when dragging or clicking a control.

■When using the keyboard, use ‹ Shift+Cmd+Enter › to set the value after typing it.

The set of all input or all output channels on the Galileo that are not isolated will now share the same control value.

Isolating a Single Channel

When multiple Selects are enabled, changing the value of a control for one selected channel normally changes it for all selected channels. To momentarily override this behavior:

■When using the mouse, hold ‹ Cmd › when dragging or clicking a control.

■When using the keyboard, use ‹ Cmd+Enter › to set the value after typing it.

Switching Between Absolute and Relative Gain Control Adjustment

The default behavior of linked channel gain adjustment — absolute or relative value change — can be overridden using the keyboard:

■ When using the mouse, hold ‹ Alt › when dragging or clicking a control.

24