Enabled Link Groupchannels are linked independently and in addition to selected
channels
Enabling a channel Select for a channel in a link grouphas no effect on the channel
Select for other channels in the link group.
Adark blue (light blue) background on link group channels indicates they are individually
selectable.
Isolate Linking Behavior:
Thissetting determines whether isolated channels are affected by changes made to channels
to which they arelinked:
Isolated channels will not be included when linking fromanother channel
Controlchanges that would normally replicate among linked channels will not affect
any isolated channels in the link group.
Isolated channels will be included when linking fromanother channel
Controlchanges made to a linked channel will affect isolated channels in the link group.
Global Galileo Select-Linking Mode:
This setting determines how controlchanges are propagated across a set of selected,
linked Galileo units.
Connected Galileo units listed on the Galileos page can be linked to one another by
activating their Select buttons and assigning them the same ID group.Control value
changes on one Galileo channel will then be copied to the same controlsof other units.
All selected channels on selected Galileos areglobally linked
Changes made to a selected channel on the active Galileo will be replicatedin all
selected, non-isolated channels on the linked Galileos. If the selected channel on the
active Galileo is isolated, its changes arenot propagated. Channel links on the active
Galileo do not propagatetheir changes.
A light greenbar across the top of the Galileo tab indicates the Galileos are linked in
“all selected channels”mode. On the Galileos page, enabled Select buttons will be
bright greenin color.
78
CHAPTER4: USER INTERFACE REFERENCE