COMPASS USER GUIDE

When using the keyboard, use ‹ Alt+Enter › to set the value after typing it.

The selected control value will be adjusted using the alternative behaviour. See Channel Linking Preferences (p. 76) for more detail.

Automatic Negative Gain Values

When typing a value in a gain value input box the default behavior for Compass is to assume the value is negative unless preceded by a plus: for example, typing 2 in a gain value box will set the gain to −2 dB. Type +2 to set the gain to +2 dB. This behavior can be changed; see User Interface Display and Control Options (p. 72) for details.

Setting Full Attenuation Gain Values

When using the keyboard, type -i, -inf, or a value less than -60 to set gain to full attenuation.

Arithmetic in Gain Value Controls

Gain value boxes support addition and subtraction through the keyboard:

To increase a value by an amount, precede the value with double-plus: for example, typing ++2 in a gain value box will increase the value by two decibels.

To decrease a value by an amount, precede the value with double-minus: for example, typing --6 in a delay value box will decrease the value by six decibels.

The normal behavior of a gain value box is to accept the value as an absolute: typing +2 in a gain value box sets the value to 2 dB; typing -6 in a gain value box sets the value to −6 dB.

Rapid Fader Values Changes with the Mouse

Click a numeric value to the right of the fader slider to directly set common integer values.

Click above or below the fader slider to increment or decrement the value.

Fine and Coarse Rotary Encoder Value Changes with the Mouse

Click the center of an encoder before dragging to boost value change speed by a factor of ten. The pointer will display 10x to indicate values will change rapidly.

25

Page 43
Image 43
Meyer Sound galileo 616 operating instructions Automatic Negative Gain Values, Setting Full Attenuation Gain Values