Meyer Sound galileo 616 Boot Snapshot, Name, Clear ‘Is Boot’, Snapshot Library

COMPASS USER GUIDE

Save

Saves the current project, using the existing project name.

Save As...

Displays a file selection window, through which you can select a directory and file name for the project.

Close

Closes the current project. This will prevent changes from being accidentally written to the project.

Boot Snapshot:

Name

Shows the name of the boot snapshot, which will be recalled when the Galileo is first powered-on. This can be used to provide a “default mode” of safe system settings and control values appropriate for recovery from a site power failure, or to provide appropriate control values for the first few minutes of beginning preparations for a show.

Recall

Recalls the boot snapshot, setting the Galileo’s controls as if power-on had just occurred.

Select

Selects the boot snapshot in the Snapshot Library list (described below). This is a convenience shortcut, so that you do not have to scroll through the list looking for the snapshot.

To make a snapshot the boot snapshot, use the Is Boot selector in the Snapshot Library.

Clear ‘Is Boot’

Removes the boot snapshot indicator from the snapshot. As a result, the configuration settings and control values the Galileo had when powered-off will be restored when power is restored (instead of using the settings and control values captured in a boot snapshot.)

Snapshot Library:

ID, Name, Comment

Shows information about the selected snapshot.

99