HP Vectra VL 5/xxx manual If an Accessory Board Does Not Work

Models: Vectra VL 5/xxx

1 110
Download 110 pages 28.95 Kb
Page 68
Image 68

3 Troubleshooting Your PC

If Your PC Has a Hardware Problem

If an Accessory Board Does Not Work

Carry out the following checks:

Ensure the board has been firmly installed in the accessory board slot.

Check that the accessory board has been correctly configured with the ISA Configuration Utility if necessary.

Ensure the board is not using memory, I/O addresses, an IRQ, or DMA also used by the PC. Refer to "IRQs, DMAs, and I/O Addresses Used by Your PC", on page 65. Refer to the board’s manual for further details.

Check that the PC has been configured correctly in Setup.

56

Page 68
Image 68
HP Vectra VL 5/xxx manual If an Accessory Board Does Not Work