2 How to Install Accessories In Your PC

Installing Mass Storage Devices

Installing an IDE Hard Disk Drive in the Rear Shelf

The PC has an integrated Enhanced IDE controller which supports two Fast IDE hard disk drives. Refer to the drive’s manuals to see if you must set jumpers or if there is a special installation procedure to follow

1Disconnect the computer’s power supply cord and any connection to a telecommunications network.

2Remove the computer’s cover.

3Slide the drive into the rear drive shelf, supporting the drive with your hand.

4Align the drive with the holes in the rear drive shelf. Then secure the drive with the screws provided with it.

Step 3: Slide drive into rear shelf.

Step 4: Align and secure the drive.

30

Page 42
Image 42
HP Vectra VL 5/xxx manual Installing an IDE Hard Disk Drive in the Rear Shelf