5.Remove the front section of the bottom cushion (Callout 2) and the ramp. (callout 1, Figure 3-3)

Figure 3-3 Removing the Ramp and Front Cushion

6.Attach the ramp to the plywood deck using the hook-and-loop. (Callout 1, Figure 3-4)

NOTE: Box clamps must be folded out of the way to lay the ramp down.

Figure 3-4 Attaching the Ramp

WARNING! The HP Workgroup System weighs 300+ pounds. To avoid injury, you might require a second person to assist you with this step.

7.Gently roll the unit down the ramp. (Callout 1, Figure 3-5)

16 Hardware Setup