3 Interface Devices and Mass-Storage Drives

10BT/100TX LAN Controller

10BT/100TX LAN Features

Feature:

Description:

 

 

LAN Controller

AMD PCNET-Fast chip

 

 

RJ45 Connector

10BT/100TX autonegotiation

 

 

Remote Boot

Protocols integrated in System BIOS

 

 

ExtStart Connector

• Connection to CPU board

 

• LAN remote power on signals

 

 

Remote Power On

• Full remote power on with Magic Packet

 

 

Remote Wake Up

• Wake Up from Suspend state with Magic Packet

 

 

Remote Power On

Remote Power On (RPO) is available at 10 and 100 Mbits per second.

Vstandby requirements The Vstandby requirements for HP network cards supporting RPO, is:

supporting RPO

• A power supply able to deliver at least 250mA on Vstandby output. This is the case for all HP Kayak systems.

Optional Bootrom Socket It is possible to add a flash device on the network card socket with a specific LAN bootrom code. This new bootrom code will be seen and mapped automatically by the system BIOS instead of the embedded version (system BIOS).

NOTE

At the time this TRM was produced, there was no flashing tool available to

 

allow you to update the bootrom content in the flash on the LAN adapter. A

 

flashing tool for any AMD based card may be available, but in order to use this

 

tool on HP cards, only 29fxxx flash devices must be used. At present, no test

 

has been carried out using this tool on HP cards.

 

 

Flash / ROM Devices

The 10BT/100TX card provides a PLCC 32-pin socket and any size of flash

 

device can be used up to 256KB§.

62