Husqvarna 13 C, 16 AWD Lubricating the belt adjuster, Lubrication Rider 11 C, General lubrication

Models: 11 C 16 C 16 AWD 13 C

1 40
Download 40 pages 23.12 Kb
Page 32
Image 32
Rider 16 AWD

Lubrication

Rider 16 AWD

Check that there is oil in the transmission’s oil tank. Fill if necessary with engine oil SAE 10W/40 (class SF–CC).

The oil and filter should be changed by an authorised service representative, as described in the Workshop Manual.

Work on the system entails particular demands on cleanliness and the system must be vented before the machine is used.

Lubricating the belt adjuster

The belt adjuster should be lubricated regularly using good quality molybdenum disulphide grease*.

Lubricate using a grease gun, 1 nipple from the right-hand side under the engine’s lower belt pulley, until grease is forced out.

With daily use, lubrication should be carried out twice weekly.

Lubrication Rider 11 C

Lubricating the front wheel bearings

The front cover and wing covers must be removed on Rider with rear ejection, so that the tubular loop can be lifted to remove the wheel.

1Remove the plastic cover that covers the centre of the wheel.

2Remove the circlip and washer on the front wheel axle.

3 Lift off the wheel.

4Lubricate the stub axle with molybdenum disulphide grease*.

5Assemble the parts in the reverse order.

IMPORTANT INFORMATION

Check that the circlip enters the groove correctly.

*Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality. The most important property is that the grease provides good protection against corrosion.

General lubrication

All joints and bearings are lubricated using molybdenum disulphide grease during manufacture. Continue to lubricate using the same type of grease *. Lubricate the steering and control wires using engine oil.

Carry out this lubrication regularly; with daily use, the machine should be lubricated twice weekly.

*Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality. The most important property is that the grease provides good protection against corrosion.

32 – English

Page 32
Image 32
Husqvarna 13 C, 16 C manual Lubricating the belt adjuster, Lubrication Rider 11 C, General lubrication, Rider 16 AWD