![Rider 13 C](/images/new-backgrounds/93454/9345471x1.webp)
TECHNICAL DATA
| Rider 13 C | Rider 16 AWD | |
Dimensions |
|
| |
Length without cutting unit, mm/ft | 2010/6,58 | 2010/6,58 | |
Length with cutting unit, mm/ft | 2220/7,29 | 2220/7,29 | |
Width without cutting unit, mm/ft | 880/2,89 | 880/2,89 | |
Width with cutting unit, mm/ft | 1114/3,65 | 1114/3,65 | |
Height, mm/ft | 1070/3,52 | 1070/3,52 | |
Operating weight with cutting deck, kg/lb | 232/511 | 270/595 | |
Wheel base, mm/ft | 855/2,8 | 855/2,8 | |
Track width, front, mm/ft | 715/2,37 | 715/2,37 | |
Track width, rear, mm/ft | 625/2,05 | 625/2,05 | |
Tyre dimensions | |||
Air pressure, rear - front, kPa / kp/cm3 / PSI | 60 (0,6/8,5) | 60 (0,6/8,5) | |
Max. gradient | 10° | 10° | |
Engine |
|
| |
Brand / Model | Briggs & Stratton/ | Briggs & Stratton/ | |
219907011E1 | 219907011E1 | ||
| |||
Power1), hp | 12,5 | 15,5 | |
Displacement, cm3/cu.in | 465 | 465 | |
Fuel, minimum octane grade | 85 | 85 | |
Fuel tank capacity, litre | 10 | 10 | |
Oil synthetic, class | SAE 5W/30 or SAE 10W/ | SAE 5W/30 or SAE 10W/ | |
30 | 30 | ||
| |||
Oil tank capacity, litre/USqt | 1,4/1,5 | 1,4/1,5 | |
Starting | Electric starter | Electric starter | |
Electrical system |
|
| |
Type | 12 V, negative earthed | 12 V, negative earthed | |
Battery | 12 V, 24 Ah | 12 V, 24 Ah | |
Spark plug | Champion QC12YC | Champion QC12YC | |
Electrode gap, mm/inch | 0,75/0,030 | 0,75/0,030 | |
Main fuse | Spade connector, 7.5 A | Spade connector, 7.5 A | |
Noise emissions and cutting width |
|
| |
Sound power level, measured dB(A) | 100 | 100 | |
Guaranteed noise level | 100 | 100 | |
Cutting width, mm | 940/3,08 | 940/3,08 | |
Vibration levels |
|
| |
Vibration level on the steering wheel, measured according to EN | 2,5 | 2,5 | |
836:1997 / A2:2001, m/s2 | |||
|
| ||
Transmission |
|
| |
Brand | Tuff Torq K46 | Tuff Torq | |
Oil, class | SAE 10W/30 | SAE 10W/40 | |
Number of forward gears | - | - | |
Number of reverse gears | - | - | |
Forward speed, km/h. | |||
Reverse speed, km/h | |||
Cutting unit |
|
|
Type
Cutting heights, 7 positions, mm/inch Blade length, mm/inch
1)As rated by the engine manufacturer
mm | mm |
360/14 3/16” | 360/14 3/16” |
36 – English