Storage

Winter storage

At the end of the season, or if the machine is going to stand idle for more than 30 days, it should immediately be made ready for storage. Fuel which is left to stand for long periods (30 days or more) can leave tacky deposits which can block the carburettor and interfere with the engine.

Fuel stabiliser is an acceptable alternative to avoid tacky deposits during storage. If alkylate petrol (Aspen) is used stabiliser is not necessary since this fuel is stable. However, one should avoid changing from standard to alkylate petrol since sensitive rubber parts can harden. Add stabiliser to the fuel in the tank or the storage container. Always use the mixing ratios indicated by the manufacturer. Run the engine for at least 10 minutes after adding the stabiliser so that it will reach the carburettor. Do not empty the fuel tank and carburettor if stabiliser has been added.

WARNING! Never place an engine with fuel

!in the tank indoors or in poorly ventilated areas where petrol fumes can come into contact with naked flames, sparks or pilot flames in boilers, hot water heaters, drying cabinets, etc. Exercise caution when handling fuel. It is highly inflammable, and careless use can cause serious injury and damage to property. Drain off the fuel in an approved container outdoors and well clear of naked flames. Never use petrol for cleaning purposes. Use degreasing agents and hot water instead.

To prepare the machine for storage follow these instructions:

1Carefully clean the machine, especially under the cutting unit. Touch-up paint damage to avoid rust.

2Inspect the machine for worn or damaged parts and tighten loose screws and nuts.

3Change the engine oil, and take care of the waste oil.

4Empty the fuel tank. Start the engine and run it until the carburettor is emptied of fuel.

5Remove the plugs and pour about a tablespoon of engine oil into each cylinder. Pull round the engine to distribute the oil and screw the plugs back on.

6Grease all grease nipples, joints and axles.

7Remove the battery. Clean it, charge it, and store it in a cool place.

8Store the machine in a clean and dry place and cover it over for extra protection.

Guard

There is a cover to protect your machine during storage or transport. Contact your dealer for a demonstration

Service

Low season is the most suitable time to perform a service or overhaul of the machine in order to ensure high function safety during high season.

When ordering spare parts state your machine’s purchase year, model, type, and serial number.

Always use genuine parts.

Annual inspection or tuning by an authorised service workshop is a good way of getting the best out of your machine the next season.

34 – English

Page 33 Page 35
Page 34
Image 34
Husqvarna 16 C, 13 C, 16 AWD, 11 C manual Storage, Winter storage, Guard, Service
Page 33 Page 35

11 C, 16 C, 16 AWD, 13 C specifications

Husqvarna is renowned for its high-performance outdoor power equipment, and their line of ride-on mowers, including the Husqvarna 16 C, 16 AWD, 13 C, and 11 C, are no exception. These models are designed for efficiency, reliability, and superior cutting performance, making them ideal for homeowners and landscapers alike.

The Husqvarna 16 C is a robust machine featuring a powerful engine that delivers reliable performance for a variety of mowing tasks. It comes equipped with a cutting deck that ensures a clean and even cut, coupled with adjustable cutting heights to adapt to varying grass types and terrains. This model emphasizes ease of use with its intuitive controls and ergonomic design, providing a comfortable mowing experience.

In contrast, the Husqvarna 16 AWD stands out with its all-wheel drive technology, providing exceptional traction and stability on sloped or uneven surfaces. This feature allows users to tackle challenging terrains without sacrificing performance. The 16 AWD also incorporates innovative air induction mowing technology, which enhances airflow within the cutting deck, resulting in superior grass lift and an even cut. Users will appreciate its maneuverability and precision, making it suitable for a variety of yard sizes and shapes.

The Husqvarna 13 C model is designed for those seeking a compact but powerful mowing solution. It is equipped with a user-friendly control panel and features a tight turning radius, making it highly maneuverable in smaller spaces. Its efficient engine ensures that users can cover more ground in less time, while the adjustable cutting deck accommodates various mowing heights.

Finally, the Husqvarna 11 C is the smallest in the lineup but does not compromise on performance or features. It is ideal for residential use and is particularly suited for tight spaces and intricate landscapes. The 11 C combines lightweight construction with a powerful engine, ensuring that it can handle various mowing tasks with ease. Its compact design allows for easy storage, making it perfect for homeowners with limited storage space.

Each of these models showcases Husqvarna's commitment to innovation and quality. With features such as enhanced safety systems, durable construction, and advanced cutting technologies, they are engineered to deliver excellent performance and durability. Choosing a Husqvarna ride-on mower means investing in a machine that is built to last, providing a reliable solution for all your mowing needs.
Top Page Image Contents