Husqvarna 15V2 manual Cutting unit, Lift lever for cutting unit, Presentation

PRESENTATION

Cutting unit

The Rider 15V2 can be fitted with five different cutting units.

BioClip	-	900 mm/35"
Rear ejector -		970 mm/38"
Side ejector -		970 mm/38"
Combi	-	1030 mm/41"
Combi	-	1120 mm/44"

See “Maintenance \ Checking the Blades” for identification of the cutting unit.

The combi deck functions as a mulching deck when a bio-clip plug is mounted. Without the plug, the deck will function as a rear ejection deck.

Lift lever for cutting unit

The lift lever is used to set the cutting unit in trans- port or cutting position.

If the lever is pulled back the unit will lift up and the blades will automatically stop rotating (transport position).

If the lock button is pressed and the lever is moved forward the unit will be lowered and the blades will automatically start rotating (cutting position).

The lever can also be used to temporarily regulate the cutting height, e.g. for a small mound in the lawn.

Lifting of the cutting unit (transport position)

Lowering of the cutting unit (cutting position)

English – 13