Husqvarna ProFlex 21 Cutting height adjustment lever, Lever for hydraulic lift of attachments, PF

PRESENTATION

Cutting height adjustment lever

Using the cutting height lever, the cutting height can be adjusted between 7 different positions.

In order to obtain an equal cutting height, it is important that the air pressure is the same in both front wheels (60 kPa).

8009-557

Lever for hydraulic lift of attachments, PF 21

The lifting lever is used to put the cutting unit in either the transport or mowing position when hydraulic pressure is available.

In the transport position, the blade brake is automatically activated so that the blades stop within about 5 seconds.

Lifting the cutting unit (transport position)

Pull the lever backwards to engage the transport position.

The unit is raised and the blades stop rotating.

Secure the cutting unit if necessary using the mechanical lifting lever.

8009-536

Raising the cutting unit with the hydraulic lifting lever

Lowering the unit (mowing position)

If the cutting unit is secured in the transport position using the mechanical lifting lever, move the mechanical lifting lever to the cutting position.

Move the hydraulic lifting lever forwards to engage the cutting position. The unit is lowered and the blades begin to rotate.

In order to ensure that the hydraulic cylinder is in the outer position, hold the lever in the forward position for a half to one second.

8009-538

Lowering the unit with the hydraulic lifting lever

English-17