MAINTENANCE
Changing the cutting unit’s belt
WARNING!
Protect your hands with gloves when working with the blades.
There is a risk of crush injuries when working with the belt.
Changing the belt on the Combi unit
On these cutting units with
1.Dismantle the cutting unit, see page 53.
2.Loosen the unit frame (1) see page 55, the screw on the parallelism strut (2) and the two screws on the cover (3). Lift the protective cover from the belts.
3.Loosen the spring (4) that tensions the
4.Attach the new belt.
The belt tightening schedule is located on a decal on the inside of the protective cover.
5.Check that the belt tensioning equipment is not jammed or binding and replace the spring.
6.Replace the protective cover and attach the parallelism strut and unit frame.
7.Attach the cutting unit to the machine, see “Attaching the cutting unit” on page 47.
3
3 
1
2
