Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna ProFlex 21 manual Left-hand wing cover, Checking the engine’s cooling air intake

Models: ProFlex 21

1 96

Download 96 pages 8.4 Kb

Page 35

MAINTENANCE

Left-hand wing cover

PF 18

Loosen the screws (1 and 2) and remove the wing cover.

PF 21

Remove the differential lock pedal knob. Loosen the screws (1 and 2) and remove the wing cover.

Transmission cover

Loosen both screws (one on each side) and lift off the transmission cover.

Checking the engine’s cooling air intake

Clean the air intake grille in the engine cover behind the driver’s seat.

Open the engine cover.

WARNING!

The cooling air intake rotates when the engine is running. Mind your ﬁngers.

Check that the cooling intake is free from leaves, grass and dirt.

Check the air duct, located on the inside of the engine cover, ensure it is clean and does not rub against the cooling air intake.

A blocked cooling intake will interfere with the cooling of the engine, which can damage the engine.

6020-008

6008-209

8009-489

Air intake grille

8009-152

Cooling air intake

English-33

Image 35

Husqvarna ProFlex 21 manual Left-hand wing cover, Checking the engine’s cooling air intake, Transmission cover

Contents

Rider ProFlex 18 Rider ProFlex Svenska Operator’s Manual for Rider ProFlex 18 and ProFlex ContentsImportant Information Introduction IntroductionSerial Number Proper ServiceSymbols and decals Explanation of SymbolsXxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx General use Safety InstructionsSafety instructions Keep children away from the work area Do not drive down slopes with the unit raised Do as follows Driving on slopesChildren MaintenanceDo not smoke when carrying out maintenance Transport Presentation PresentationPlacement of Controls Accelerator Throttle ControlChoke Lever Cutting unit AccessoriesLights and power outlet Lowering the unit mowing position Cutting height adjustment leverLever for hydraulic lift of attachments, PF Lifting the cutting unit transport positionMowing position Mechanical lifting lever for cutting unitTransport position Fuelling Parking brakeSeat Chronometer Differential lock, PFClutch control Mowing tips DrivingImpaired cooling of the engine. Risk of major engine damage DrivingBefore Starting Starting the engineDo not run the starter motor for more than Driving the Rider, PF Stopping the engine, PF English-26 English-27 English-28 Maintenance schedule MaintenanceMaintenance = Described in this manual = Not described in this manual English-31 Right-hand wing cover Removing the Rider’s coversEngine cover Front coverTransmission cover Left-hand wing coverChecking the engine’s cooling air intake Checking the transmission air intake Cleaning the engine and mufﬂerChecking and adjusting the steering cables Adjusting the differential lock, PF Checking and adjusting the throttle cableChecking and adjusting the choke cable Cable holder Adjusting the hydrostatic transmission cablePoorly adjusted brake can result in reduced braking ability Adjusting the parking brakeReplacing the air ﬁlter, PF Replacing the air ﬁlterEnglish-40 English-41 Checking the fuel pump’s air ﬁlter Cleaning the pulse air ﬁlterReplacing the fuel ﬁlter Wrong spark plug type can damage the engine Checking the battery acid levelChecking the tyre pressures Ignition systemReplacing the spark plug FusesChecking the safety system Replacing the light bulbs Exercise caution Risk of crush injuries Cutting unit componentsAttaching the cutting unit Watch your ﬁngers. Do not turn the blades or the belt Check that the belt is around the idler Belt Sketch Parallelism Cutting heightGround pressure Cutting unit’s service positionPlacing in the service position Releasing the service positionChecking the blades Cutting unit modelExercise caution. Risk of crush injuries Removing the cutting unitPull out the unit so that it catches on the outer hooks Removing the belt Removing the unit frameHook the spring to the blade brake Attaching the beltChanging the cutting unit’s belt Removal of BioClip Plug Lubrication schedule, PF LubricationLubrication English-60 Lubricating the cables GeneralPedal mechanism in frame tunnel Lubricating in accordance with the lubrication scheduleDifferential lock cable, PF Chains in the frame tunnelOil is topped up through the hole the dipstick sits Engine oilReplacing the engine oil Driver’s seat Gear leverTransmission Throttle and choke cables, lever bearings Oil ﬁlter, change Hydraulic oil ﬁlter, change, PFTransmission oil level Parking Brake CableEnglish-70 Problem Cause Trouble ShootingTrouble Shooting Guide English-72 Winter Storage StorageStorage Service Electrical system Electrical and Hydraulic SystemsEnglish-76 Hydraulic system, PF English-78 Technical data Technical DataCutting unit Combi Data Rider ProFlex Hydraulic SystemTransmission ProFlex 18 01/901/009 ProFlex 21 01/901/010 EU Declaration of ConformityEU Declaration of Conformity EU Declaration of Conformity only applies to EuropeEnglish-82 After the First 8 Hours Service JournalService journal ActionAction Date, mileage reading, stamp Signature Hour Service English-85 English-86 English-87 English-88 Action Date, mileage reading, stamp, signature English-90 Svenska ´z+H6T¶68¨ Svenska 114 02