Husqvarna ProFlex 21 manual Removing the unit frame, Removing the belt

MAINTENANCE

Removing the unit frame

Starting position for removing the cutting unit frame:

•Cutting unit removed.

1.Twist the catch out so that the forward fastener can be lifted from the cutting unit.

8009-184

2.Move the unit frame backwards so that the tongue of the cutting unit releases its grip on the bar of the unit frame and lift the frame off.

Assemble the parts in the reverse order.

8009-185

Removing the belt

Starting position for removing the belt:

•No unit is attached to the machine.

•The belt’s forward part is hung around the handle of the safety catch.

Removal of the forward part of the belt from the forward pulley is described in steps 5-8 under “Removing the cutting unit” on page 53.

8009-343

The entire belt is removed according to the following only when a snow blade is to be attached to the machine.

1.Press the guide plate under the anti-scalp roller.

2. Unhook the spring to the blade brake.

3.Take the belt off of the centre pulley.

4.Dismantle the belt.

8009-005

English-55