Husqvarna ProFlex 21 manual Parking Brake Cable, Transmission oil level

LUBRICATION

12. Parking Brake Cable

Remove the transmission cover, see "5. Gear lever” on page 66.

Unhook the spring (A) from the screw (B) if required.

Remove the cable’s rubber casing when lubricating.

Lubricate the cable with an oil can, press the brake pedal a few times and lubricate again.

Replace the spring (A) and the transmission cover.

13. Transmission oil level

1.Check the oil level in the transmission by looking through the air intake mesh. The oil level shall be between the MIN and MAX markings on the oil container when at +20°C.

If the oil needs to be filled, you must first remove the transmission cover.

2.Unscrew the oil container’s cover and fill with SAE 10W/30 engine oil, class SF-CC, until the oil level reaches the “MAX” mark. Then screw the oil container’s cap into place and attach the transmission cover.

A

B

6020-005

6008-210

English-69