MAINTENANCE

3.Remove the foam rubber pre-filter and clean using a mild detergent.

Squeeze it dry with a clean cloth.

8009-180

4.Remove the wing nuts for the air filter and remove the paper filter.

8009-182

5.Tap the paper filter against a fixed surface to remove dust.

If the paper filter is still dirty, it must be replaced.

IMPORTANT INFORMATION

Do not use compressed air to clean the paper filter.

Do not wash the paper filter. Do not oil the paper filter.

6.Refit the air filter as follows:

Check that the seal on the bottom of the paper filter is whole. Fit the paper filter in the air filter housing and tighten the wing nuts.

7.Refit the pre-filter on the paper filter.

8.Replace the cover over the air filter housing. Do not over tighten the plastic fasteners.

8009-181

English-41

Page 43
Image 43
Husqvarna ProFlex 21 manual English-41