Husqvarna ProFlex 21 manual Gear lever, Transmission, Driver’s seat

LUBRICATION

5. Gear lever

Remove the transmission cover, two screws.

Lubricate the joints and bearings on the left side with an oil can.

Remove the rubber casing and lubricate the hydrostatic transmission cable with an oil can. Press the pedal a few times and lubricate again.

Replace the rubber cover.

Replace the transmission cover.

6. Transmission

The oil and filter should be changed by an authorised service representative, as described in the Workshop Manual.

6008-209

6020-024

7. Cutting unit

Remove the front cover.

Lubricate using an oil can:

A. The safety catch

-Joints and bearings Lubricate using grease:

B.Interior plug

C.Groove for equipment frame

8. Driver’s seat

Tilt the seat back.

Lubricate the lengthways adjustment mechanism with the oil can.

Lubricate the lengthways adjustment runners with grease. Pull the seat back and forth and lubricate on both sides.

6020-004

8009-347

English-66