EXPLANATION OF SYMBOLS
Symbols and decals
These symbols can be found on the Rider and in the operator’s manual.
Study them carefully so that you know what they mean.
Read the operator’s manual.
Reverse | Neutral | Fast | Slow | Engine off | Battery | Choke | Fuel |
Oil level | Cutting Height | Reversing | Forward | Ignition |
|
|
|
|
Use hearing |
| Hydrostatic free | Parking | Brake | Warning |
protection |
| wheeling | brake |
|
|
|
|
|
|
|
|
Noise emission to surroundings in accordance with the directive of the European Community.
The machine’s emission is indicated in the TECHNICAL DATA chapter and on the decal.
Warning! Rotating | Warning! Risk of the | Never drive directly | CE conformity |
blades | Rider overturning | across a slope | marking |
Never carry passengers on the Rider or on its tools.
Never use the Rider if persons, especially children or pets, are in the immediate vicinity.
Starting instructions
Read the operator’s manual Check the engine oil level Check the oil level in the hydrostat Lift up the cutting unit
Put the hydrostat pedals in the neutral position
Brake
Use the choke if the engine is cold Start the engine
Disengage the parking brake before driving
Do not insert your | Drive very slowly |
hands or feet under | without the cutting |
the cover when the | unit. |
engine is running. |
|
Accelerator pedal forward
Neutral position
Accelerator pedal reversing
Switch off the engine and remove the ignition cable before carrying out repairs or maintenance
