Storage Architectures and Devices 111
Adapter-to-First Device Cables
Table 20 on page 111 describes the cables for the Single-Ended Ultra SCSI
Adapter for connection to the first device.
Table 20. Single-Ended Ultra SCSI Adapter-to-First Device Cables
Note: When cables are ordered by feature code (FC), the appropriate
terminator is included with the order. When cables are ordered by part
number, only the cable is included.
The external connector on these adapters are the SCSI-III standard, 68-pin P
cable connector. Many of the 16-bit SCSI devices also use this connector
type, and as a result, some cables can be used as either adapter-to-first
device or device-to-device cables, depending upon what type of SCSI
connectors are present on the devices.
M/T FC Part
Number Length
(meters) Cable Description
Host
System 2111 06H6037 1.0 Adapter-to-first device (where
first device has two connectors),
8-bit narrow bus
Host
System 2112 06H6037 1.0 Adapter-to-first device (where
first device has two connectors),
8-bit narrow bus
Host
System 2113 52G0174 1.5 Adapter-to-first device (where
first device has one connector),
8-bit narrow bus
Host
System 2114 52G0173 .94 16-bit Y-cable
Host
System 2115 06H6036 1.0 Adapter-to-first device (where
first device has two connectors),
16-bit wide bus
Host
System 2116 06H6036 1.0 Adapter-to-first device (where
first device has two connectors),
16-bit wide bus