132 RS/6000 43P 7043 Models 150 and 260 Handbook
devices located on an ATM network or bridged to a token ring, Ethernet, or
other LAN.
The TURBOWAYS 155 PCI MMF ATM Adapter is compatible with:
IBM 8285 ATM Workgroup Switch
IBM 8260 ATM Subsystem
IBM 8282 ATM Concentrator
IBM 8281 ATM LAN Bridge
A maximum of four high-speed networking adapters are supported per
system in any combination. This limitation includes the following adapters:
TURBOWAYS 155 PCI MMF ATM Adapter (# 2988)
SysKonnect SK-NET FDDI-LP SAS PCI for PowerPC Systems (# 2741)
SysKonnect SK-NET FDDI-LP DAS PCI for PowerPC Systems (# 2742)
SysKonnect SK-NET FDDI-UP SAS PCI for PowerPC Systems (# 2743
5.1.5.3 PCI TURBOWAYS 25 ATM Adapter (# 2998)
The TURBOWAYS 25 ATM PCI Adapter is for direct access to ATM networks.
This adapter provides dedicated 25 Mbps full-duplex connection using PVCs
or SVCs and enables TCP/IP to run over an ATM network. The TURBOWAYS
25 ATM PCI Adapter also supports communication with devices located on an
ATM network or bridged to a token ring, Ethernet, or other LAN.
TURBOWAYS 25 ATM PCI Adapter is compatible with:
IBM 8285 ATM Workgroup Switch
IBM 8260 ATM Subsystem
IBM 8282 ATM Concentrator
Systems ordered with AIX preinstalled will have the device drivers installed
on the hard disk drive
Note
AIX drivers are shipped on diskette with the hardware feature. Systems
ordered with AIX preinstalled will have the device drivers installed on the
hard disk drive.
Note