164 RS/6000 43P 7043 Models 150 and 260 Handbook
• Display or Change Diagnostic Run Time Options:
The Display or Change Diagnostic Run Time Options task allows the
diagnostic run time options to be set.
• Display Previous Diagnostic Results:
Each time the diagnostics produce a service request number (SRN) to
report a problem, information about that problem is logged. The service
representative can look at this log to see which SRNs are recorded.
• Display Resource Attributes:
This task displays the Customized Device Attributes associated with a
selected resource.
• Display Service Hints:
This service aid reads and displays the information in the CEREADME file
from the diagnostics media.
• Display Software Product Data:
This task invokes SMIT to display information about the installed software.
• Display System Environmental Sensors:
This service aid displays the environmental sensors implemented on a
CHRP/RPA system.
• Display Test Patterns:
This task provides a means of adjusting system display units by providing
displayable test patterns.
• Download Microcode:
This service aid provides a way to copy microcode to an adapter or
device.
• Flash SK-NET FDDI Firmware:
This task allows the Flash firmware on the SysKonnect SK-NET FDDI
adapter to be updated.
• Format Media:
The selection of diskettes, hardfiles, or optical media can be formatted.
• Generic Microcode Download:
This service aid provides a means of executing a generic script from a
diskette. The intended purpose for this generic script is to load microcode
to a supported resource.