208 RS/6000 43P 7043 Models 150 and 260 Handbook
Call-Out Policy (First/All)
The Call Out policy may be set to first or all. If the call out policy is set to first,
the SP stops at the first successful call out to one of the following numbers in
the order listed:
1. Service Center Customer
2. Admin Center
3. Pager
If the call out policy is set to all, the Service Processor attempts a call out to
all the following numbers in the order listed:
1. Service Center
2. Customer Admin Center
3. Pager
Remote Timeout, (in Seconds) and Remote Latency, (in seconds)
Remote timeout and Remote latency are functions of your service provider’s
catcher computer. You should take the defaults or contact your service
provider for recommended settings.
Number of Retries
Number of retries is the number of times you want the server to retry calls
that resulted in busy signals or other error messages.
7.5.5.6 Customer Account Setup Menu
The following is an example of a Customer Account Setup Menu.
Customer Account Number
This number is assigned by your service provider for record keeping and
billing. If you have an account number, enter it here. Otherwise, leave this
field blank.
Customer Account Setup Menu
1. Customer Account Number:
Currently Unassigned
2. Customer RETAIN Login UserID:
Currently Unassigned
3. Customer RETAIN Login Password:
Currently Unassigned
98. Return to Previous Menu
1>