Connecting the Monitor
Important: Before connecting the monitor, turn off the power supply to the computer and attached devices. If a switched mains power outlet is being used, ensure that it is turned off.
Standard connection to a PC
1.Connect the signal cable to your computer taking care to ensure that you do not force the cable into your computer the wrong way round A . Your computer may have a video adapter card installed. In this case, attach the signal cable to the connector on the video adapter card B .
2.Connect the power cord to the monitor first. Then
insert its plug in a properly grounded electrical outlet
C .
3.Connect the power cord to the computer. Then insert its plug into a properly grounded electrical outlet.
4.Turn on the monitor, then the computer (or both at the same time if using a power strip).
If attaching to a PS/2 Computer, refer to the Disabling DDC section on page 14
To obtain the best possible image, please refer to the following section, Optimising performance on page 8.
C 
A
B
7
