provide additional information. Additional error messages may not always be

accurate.

Message 101 may occur after many error conditions, because ACIF attempts to

locate the end of the resource containing the error as part of its recovery

procedure.

General Messages

General error messages are not limited to a particular resource, which is why they

are considered general error conditions. Some general errors are limited to a few

resources, while others may occur in any resource.

.
APK031I AN INLINE MEDIUM MAP WAS
ENCOUNTERED IN THE DATA SET, BUT
INLINE MEDIUM MAPS ARE NOT
SUPPORTED.
Explanation: A Begin Medium Map (BMM) structured
field was encountered in the data stream after
resources for the data set had been processed. ACIF
does not support inline medium maps between pages.
The data set may have been created by a program that
creates inline medium maps, but a data set that
contains inline medium maps cannot be printed.
System Action: ACIF stops processing the print data
set.
User Response: Correct the error and resubmit the
request.
System Programmer Response: See the I/O error
message to determine an appropriate action.
APK102S AN IM IMAGE OBJECT CONTAINS
INVALID OR INCORRECT DATA. THE IM
IMAGE OBJECT CANNOT BE
CONVERTED TO AN IO IMAGE OBJECT.
Explanation: This message is issued when ACIF
converts an IM image object to an IO image object and
one of the image size values is zero. For a simple IM
image object, this message is issued if either the XSize
or YSize parameter value of the IID structured field is
zero. For a complex IM image object, this message is
issued if one of the XCSize, YCSize, SFilSize, or
YFilSize parameter values of the ICP structured field is
zero.
System Action: ACIF stops processing the input file.
User Response: Correct the error and resubmit the
request. :spresp If an IBM licensed program was used
to create the structured fields for the resource with the
error, verify that the input to that program was valid. If
the input was valid, refer to
Advanced Function Printing:
Diagnosis Guide
and the appropriate Print Services
Facility: Diagnosis Guide and Reference for assistance
in determining the source of the problem.
APK103S DATA IN AN INPUT RECORD OR
RESOURCE IS INVALID:
structured field
name1
STRUCTURED FIELD WAS
FOUND WHERE
structured field name2
STRUCTURED FIELD WAS EXPECTED.
Explanation:
Structured field name1
is incorrect at the
present point in the input data stream or resource. The
structured-field type expected at this point is
structured
field name2
. Either the required structured field is
missing or out of sequence, or a line-data record is in
the wrong place.
Subsequent error messages give additional information
about the processing environment when the error
occurred.
System Action: ACIF stops processing the print data
set.
User Response: If you created the structured fields
for the print data set or resource, correct the error and
resubmit the print request. Refer to
Mixed Object
Document Content Architecture Reference
or
Advanced
Function Presentation: Programming Guide and Line
Data Reference
for more information on the correct
format of the referenced structured field. If the
structured fields are in the correct order, the error may
be an ACIF logic error. If you used a program to create
the structured fields for the print data set or resource,
contact your system programmer.
System Programmer Response: If an IBM licensed
program was used to create the structured fields for the
print data set or the resource with the error, verify that
the input to that program was valid. If the input was
valid, refer to
Advanced Function Printing: Diagnosis
Guide
for assistance in determining the source of the
problem.
134 ACIF User’s Guide