IBM S544-5285-01 manual INDXEXIT= module name, FileINDEXDD, INPEXIT= module

DD statement. The result of such an occurrence is that ACIF w abnormally.

ŸVariable blocked format

ŸPhysical sequential format

INDEXDD=INDEX			filename		(DEVT=TAPE		DISK )	(VSE)
Specifies the				file	name that appears on the DLBL or TLBL JCL stat
1–7	character			string	containing only			those	alphanumeric characters s
in	the	operating environment.				The	following		are the characteristics

ŸA block size of 32 760

If a record length other than 32756 is specified, it is poss produce a record of length greater than that which is allowed or TLBL JCL statement. The result of such an occurrence is tha terminate abnormally.

Ÿ A maximum record length of 32 756

ŸVariable blocked format

ŸAssigned to programmer logical unit 009

INDEXOBJ=GROUP ALL NONE

Specifies the amount of information ACIF puts in the index object

SelectingGROUP causes only group-level entries to be put in the in file, which saves space.ALL Selectingcauses both page-level and group-level entries to be put in the index object fileALL .ifYouyoushouldare select indexing a file for use with the Viewer application of AFP Workbe parameter is not specified,GROUPACIF usesas the default.NONE Chooseif

you do not require an external indexNONE filewill. Chooalsoing reduce ACIF storage requirements.

INDEXSTARTBY=1		nn
Specifies the output page number by			which ACIF must	find an	inde
ACIF is	indexing the file. If ACIF		does not find an	indexing	fie
message	and stops processing.

This parameter is helpful if your file contains header pages. Yo page number 1 greater than the number of header pages, so that continue to look for matches for the number of pages specified parameter.

INDXEXIT= module name

Specifies the name of the index record exit program. This is a character name of the load module ACIF loads during initialization

subsequently calls for every record		(structured field)		it	writes
fileINDEXDD(	). If this parameter is	not	specified, no	index	recor
See “Index Record Exit” on page 69		for	more detailed	information.
INPEXIT= module	name

Specifies the name of the input record exit program. This is a character name of the load module ACIF loads during initialization

subsequently	call	for every	input record	it readsINPUTDD from). the input
If this parameter is not			specified, no	input	record exit is us
Record Exit”	on	page 123	for more detailed		information.

Chapter 7. Using ACIF Parameters in OS/390, MVS, VM,99and VSE