If you did not intend to print line data, and you used a
program to create the structured fields for the print data
set, ensure that all composed-text data records begin
with the X'5A' control character.
If you did not intend to print line data, and you used a
program to create the structured fields for the print data
set, contact your system programmer.
System Programmer Response: No response is
necessary.
APK159S THE END OF THE DATA STREAM WAS
ENCOUNTERED BEFORE THE LOGICAL
END OF AN OBJECT WITHIN THE DATA
STREAM.
Explanation: ACIF was processing an object that
began with a Begin-type structured field. However, the
input data stream ended before a corresponding
End-type structured field was found. The message can
also occur if the system operator prematurely interrupts
or ends a print request by issuing an INTERRUPT,
RESTART, or CANCEL Job Entry Subsystem (JES)
command.
System Action: ACIF stops processing the print data
set.
User Response: If you created the structured fields
for the print data set, correct the error and resubmit the
print request. Refer to
Mixed Object Document Content
Architecture Reference
or
Advanced Function
Presentation: Programming Guide and Line Data
Reference
for more information about the structured
field. If the structured field has no error, the error may
be an ACIF logic error. If you used a program to create
the structured fields for the print data set, contact your
system programmer.
System Programmer Response: If an IBM licensed
program was used to create the structured fields for the
print data set or the resource with the error, verify that
the input to that program was valid. If the input was
valid, refer to
Advanced Function Printing: Diagnosis
Guide
for assistance in determining the source of the
problem.
APK162S MISMATCH BETWEEN PRINT DATA SET
AND PAGEDEF RESOURCE: DATA MAP
data map
SPECIFIED IN IDM
STRUCTURED FIELD WAS NOT FOUND
IN PAGEDEF
page definition
.
Explanation: The Token Name parameter in the
Invoke Data Map (IDM) structured field specifies the
token name used to locate a data map in the page
definition. The name must match the value specified in
the Token Name parameter in the Begin Data Map
(BDM) structured field in the current page definition.
The IDM structured field is contained in the print data
set.
System Action: ACIF stops processing the print data
set. ACIF issues a message identifying the position of
the structured field in the data stream or resource.
User Response: Ensure that the correct page
definition was specified. If it was, and if you added the
Invoke Data Map structured field to the print data set,
change the Token Name in the IDM structured field and
resubmit the print request. Refer to
Advanced Function
Presentation: Programming Guide and Line Data
Reference
for more information about the BDM and IDM
structured fields. If the correct page definition was
specified, and if you used a program to imbed the IDM
structured field in the print data set, verify that the data
map name that you supplied the program is one that is
valid for the page definition you have specified.
System Programmer Response: No response is
necessary.
APK163S DATA IN AN INPUT RECORD OR
RESOURCE IS INVALID: THE SCALE
FACTOR VALUE IN THE IOC
STRUCTURED FIELD IS NOT
ACCEPTABLE.
Explanation: The Image Block Scale Factor
parameter in the Image Output Control (IOC) structured
field is invalid. The image block or image cell may be
contained in an overlay, a page segment, or a
composed-text print data set. It may also be imbedded
in a data set containing line data, using a Begin Image
(BIM) structured field.
System Action: ACIF stops processing the print data
set. ACIF issues a message identifying the position of
the structured field in the data stream or resource.
User Response: If you created the structured fields
for the resource or print data set containing the image,
correct the error in the referenced structured field and
resubmit the print request. Refer to
Mixed Object
Document Content Architecture Reference
for more
information about the structured field. If the structured
field has no error, the error may be an ACIF logic error.
If you used a program to create the structured fields for
the resource or print data set containing the image,
contact your system programmer.
System Programmer Response: If an IBM licensed
program was used to create the structured fields for the
print data set or the resource with the error, verify that
the input to that program was valid. If the input was
valid, refer to
Advanced Function Printing: Diagnosis
Guide
for assistance in determining the source of the
problem.
Chapter 10. ACIF Messages for OS/390, MVS, VM, and VSE 143