APK104S DATA IN AN INPUT RECORD OR
RESOURCE IS INVALID:
structured field
STRUCTURED FIELD IS NOT ALLOWED
OR FORMS AN INVALID SEQUENCE.
Explanation: The structured field identified in this
message is either out of sequence or invalid in an
object. The record may be line data. If inline resources
are used with data-set header pages, multiple resource
groups might be present.
System Action: ACIF stops processing the print data
set.
User Response: If you created the structured fields
for the print data set or resource, correct the error and
resubmit the print request. Refer to
Mixed Object
Document Content Architecture Reference
or
Advanced
Function Presentation: Programming Guide and Line
Data Reference
for more information on the correct
format of the referenced structured field. If the
structured fields are in the correct order, the error may
be an ACIF logic error. If you used a program to create
the structured fields for the print data set or resource,
contact your system programmer.
System Programmer Response: If an IBM licensed
program was used to create the structured fields for the
print data set or the resource with the error, verify that
the input to that program was valid. If the input was
valid, refer to
Advanced Function Printing: Diagnosis
Guide
for assistance in determining the source of the
problem.
APK105I THE ERROR REPORTED ABOVE
OCCURRED IN LOGICAL RECORD
NUMBER
record number
, WHOSE
SEQUENCE NUMBER IS
sequence
number
.
Explanation: This message is given in addition to the
message that describes the error. It identifies the
specific invalid input record. The object (if any) that
contains the invalid record is identified in either
message APK108I or message APK109I, which follows
this message.
The record number specified is relative to the user data
stream and is different for multiple transmissions of the
data set. However, the record number may be
inaccurate if the data set is using a page definition that
performs conditional processing.
The sequence number may print as NOT AVAILABLE in
the message. For example, a line-data record does not
have a sequence number.
System Action: The disposition of the file depends
upon the error described in the accompanying
messages.
User Response: See the specific error conditions
described in the accompanying messages to determine
an appropriate response.
System Programmer Response: See the specific
error conditions described in the accompanying
messages to determine an appropriate response.
APK106I DATA IN AN INPUT RECORD OR
RESOURCE IS INVALID: NAME
token
name
IN
Begin-type structured field
DOES
NOT MATCH NAME
token name
IN
End-type structured field
.
Explanation: The Token Name parameters in the
Begin-type and End-type structured fields identified in
this message do not correlate. Structured fields may be
out of sequence in the input data stream.
When token names are specified, the Token Name
parameters in the associated Begin-type and End-type
structured fields must correlate.
System Action: Processing continues, and ACIF
issues a message identifying the position of the
structured field in the input data stream or resource.
ACIF issues additional messages identifying the
processing environment when the error was found.
User Response: If you created the structured fields
for the print data set or the resource, correct the error
and resubmit the print request. Refer to
Mixed Object
Document Content Architecture Reference
or
Advanced
Function Presentation: Programming Guide and Line
Data Reference
for more information about the
structured field. If the structured field has no error, the
error may be an ACIF logic error. If you used a program
to create the structured fields for the print data set or
the resource, contact your system programmer.
System Programmer Response: If an IBM licensed
program was used to create the structured fields for the
print data set or the resource with the error, verify that
the input to that program was valid. If the input was
valid, refer to
Advanced Function Printing: Diagnosis
Guide
for assistance in determining the source of the
problem.
APK108I THE ERROR REPORTED ABOVE WAS
DETECTED WITHIN OBJECT TYPE
object
type
WITH TOKEN NAME
token name
.
Explanation: This message is issued in addition to the
message that describes the error. The objects that
were being processed are listed to identify the location
of the error in the input data stream or in a resource.
System Action: The disposition of the file depends on
the error described in the accompanying messages.
User Response: See the specific error conditions
described in the accompanying messages to determine
an appropriate response.
System Programmer Response: See the specific
error conditions described in the accompanying
messages to determine an appropriate response.
Chapter 10. ACIF Messages for OS/390, MVS, VM, and VSE 135