APK109I THE ERROR REPORTED ABOVE WAS
CAUSED BY THE RESOURCE

resource

name
IN AN EXTERNAL LIBRARY OR AN
INLINE RESOURCE.
Explanation: This message is issued in addition to the
message that describes the error. The object identified
in the accompanying message was either a resource
being processed from an external library or an inline
resource. The previous error message, APK108I,
identified the member as a page definition, form
definition, font, code page, font character set, page
segment, or an overlay. The combined information from
these two messages can be used to identify the library
defined to ACIF on the
type
LIB parameter, where
type
is the type of resource, such as OVLY for overlay. In
the case of an inline form definition or page definition,
the resource is not a member of an external library but
is included at the beginning of the user's data set.
System Action: The disposition of the file depends on
the error described in the accompanying messages.
User Response: See the specific error conditions
described in the accompanying messages to determine
an appropriate response.
System Programmer Response: See the specific
error conditions described in the accompanying
messages to determine an appropriate response.
APK110S DATA IN AN INPUT RECORD OR
RESOURCE IS INVALID: THE LENGTH
SPECIFIED IN THE SELF-DEFINING
PARAMETER
identifier
OF THE
STRUCTURED FIELD

structured field

IS
INCORRECT.
Explanation: Insufficient data was present in the
structured field for the length given in the self-defining
parameter. The structured field can be contained in a
bar code object, a graphics object, or an image object.
The bar code object may be contained in an overlay or
a composed-text print data set, or it may be imbedded
in a data set containing line data. The graphics object
may be contained in a composed-text print data set or
an overlay, or it may be imbedded in a data set
containing line data. The image object may be
contained in a composed-text print data set, an overlay,
or a page segment, or it may be imbedded in a data set
containing line data.
System Action: ACIF stops processing the print data
set. ACIF issues a message identifying the position of
the structured field in the data stream or resource.
User Response: If you created the structured fields
for the object, correct the error and resubmit the print
request. If the structured field has no error, the error
may be an ACIF logic error. If you used a program to
create the structured fields for the object, contact your
system programmer.
System Programmer Response: If an IBM licensed
program was used to create the structured fields for the
object with the error, verify that the input to that
program was valid. If the input was valid, refer to
Advanced Function Printing: Diagnosis Guide
for
assistance in determining the source of the problem.
APK112S DATA IN AN INPUT RECORD OR
RESOURCE IS INVALID: RECORD
CONTAINS NO DATA, EVEN THOUGH AT
LEAST A CONTROL CHARACTER IS
EXPECTED.
Explanation: ACIF read an input record without a
control character following the record descriptor word
(RDW). A minimum of 1 byte of control-character data
is needed to make the record valid.
System Action: ACIF stops processing the print data
set.
User Response: If you created the structured fields
for the print data set or the resource, correct the error
and resubmit the print request. Refer to
Mixed Object
Document Content Architecture Reference
or
Advanced
Function Presentation: Programming Guide and Line
Data Reference
for more information about the
structured field. If the structured field has no error, the
error may be an ACIF logic error. If you used a program
to create the structured fields for the print data set or
the resource, contact your system programmer.
System Programmer Response: If an IBM licensed
program was used to create the structured fields for the
print data set or the resource with the error, verify that
the input to that program was valid. If the input was
valid, refer to
Advanced Function Printing: Diagnosis
Guide
for assistance in determining the source of the
problem. Refer to

MVS/Extended Architecture Data

Administration Guide

for more information about
construction and placement of RDWs.
APK113S DATA IN AN INPUT RECORD OR
RESOURCE IS INVALID: STRUCTURED
FIELD LENGTH IS LESS THAN THE
INTRODUCER LENGTH.
Explanation: A structured field must have at least 8
bytes of data, the minimum length necessary for a
structured-field introducer. The Extension Indicator flag
in the structured-field introducer indicates whether the
minimum length of the structured field can be greater
than 8 bytes.
System Action: ACIF stops processing the print data
set. ACIF issues a message identifying the position of
the structured field in the data stream or resource.
User Response: If you created the structured fields
for the print data set or the resource, correct the error
and resubmit the print request. Refer to
Mixed Object
Document Content Architecture Reference
or
Advanced
Function Presentation: Programming Guide and Line
136 ACIF User’s Guide