Manuals / IBM Partner Pavilion / Computer Equipment / Personal Computer

IBM Partner Pavilion 6792, 6343 Installing internal options - desktop model, Removing the cover

Models: 6823 6794 2292 6350 6825 6795 6792 6790 6791 6349 6793 6343

1 86

Download 86 pages 56.68 Kb

Page 41

Chapter 4. Installing internal options — desktop model

Chapter 4. Installing internal options — desktop model

You can expand the capabilities of your computer by adding memory, drives, or adapters. When installing an option, use these instructions along with the instructions that come with the option.

Removing the cover

Important:

Read “Safety Information” on page v and “Handling static-sensitive devices” on page 8 before removing the cover.

To remove the cover:

1.Shut down your operating system, remove any media (diskettes, CDs, or tapes) from the drives, and turn off all attached devices and the computer.

2.Unplug all power cords from electrical outlets.

3.Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer.

4.Press the buttons on the sides of the computer and pivot the rear end of the cover up toward the front of the computer.

© Copyright IBM Corp. 2001

29

Image 41

IBM Partner Pavilion 6792, 6343, 6793, 6349, 6791, 6790, 6795 Installing internal options - desktop model, Removing the cover

Contents

Type User Guide Type 2292, 6343, 6349 Type 6790, 6791, 6792, 6793, 6794Page Type 6823 User Guide Type 2292, 6343, 6349 Type 6790, 6791, 6792, 6793, 6794First Edition August Contents Trademarks IndexDANGER Safety InformationTo avoid a shock hazard DANGERModem safety information Lithium battery noticeDanger of explosion if battery is incorrectly replaced Dispose of the battery as required by local ordinances or regulationsConsignes de sécurité relatives au modem Laser compliance statementL’ouverture de l’unité de CD-ROM/DVD-ROM peut entraîner un risque DANGERHow this book is organized About this bookx User Guide Information resourcesIdentifying your computer Chapter 1. Overview2 User Guide Small desktop model computer Desktop model computerMicrotower model computer System management features varies by model type FeaturesInput/output features MicroprocessorIBM preinstalled software PowerExpansion Operating systems supportedPhysical specifications - small desktop model SpecificationsDimensions WeightDimensions Physical specifications - desktop modelWeight EnvironmentDimensions Physical specifications - microtower modelWeight EnvironmentHandling static-sensitive devices Available optionsTools required v Prevent others from touching components 10 User Guide Locating the connectors on the front of your computer Chapter 2. Installing external optionsNote Not all computer models will have the following connectors Chapter 2. Installing external options Locating the connectors on the rear of your computer14 User Guide Mouse connector Description Obtaining device driversConnector Removing the cover Chapter 3. Installing internal options - small desktop model18 User Guide Locating componentsIdentifying parts on the system board Installing DIMMs Installing memoryWhat to do next Installing adapters3. Remove the support bar by pulling it outward from the computer Chapter 3. Installing internal options - small desktop model22 User Guide What to do nextDrive specifications Installing internal drivesInstalling a drive What to do next Installing a Rope ClipWhat to do next Replacing the cover and connecting the cables3. Position the cover over the chassis and pivot it down over the computer until it snaps into place 28 User Guide Removing the cover Chapter 4. Installing internal options - desktop model30 User Guide Locating componentsIdentifying parts on the system board Chapter 4. Installing internal options - desktop model Installing memoryInstalling DIMMs 32 User Guide Installing adaptersWhat to do next What to do next Installing internal drives34 User Guide Drive specificationsInstalling a drive 36 User Guide To connect the first IDE CD drive or DVD driveTo connect an additional IDE hard disk drive To connect an additional IDE CD drive or DVD driveInstalling a Rope Clip What to do next38 User Guide Replacing the cover and connecting the cablesWhat to do next Chapter 4. Installing internal options - desktop model 40 User Guide Removing the cover Chapter 5. Installing internal options - microtower model42 User Guide Moving the power supplyLocating components Identifying parts on the system board Chapter 5. Installing internal options - microtower model44 User Guide Installing memoryInstalling DIMMs What to do next Installing adapters5. Install the adapter slot cover latch 4. Install the adapter into the appropriate slot on the system board3. Remove the adapter from its static-protective package 46 User GuideWhat to do next Installing internal drivesDrive specifications 48 User Guide Installing a drivev If it is the first CD drive or DVD drive, set as a master device 50 User Guide To connect the first IDE CD drive or DVD driveTo connect an additional IDE CD drive or DVD drive Installing a Rope ClipTo connect an additional IDE hard disk drive What to do next52 User Guide Replacing the cover and connecting the cablesWhat to do next Chapter 5. Installing internal options - microtower model 54 User Guide Starting the IBM Setup Utility program Chapter 6. Using the IBM Setup Utility programViewing and changing settings Exiting from the IBM Setup Utility programErasing a lost or forgotten password clearing CMOS Administrator passwordSetting, changing, and deleting a password Other settings in the IBM Setup Utility program Using Security Profile by DeviceThe startup sequence Changing the startup sequence58 User Guide Appendix A. Changing the battery 9. Turn on the computer and all attached devices System programs Recovering from a POST/BIOS update failureAppendix B. Updating System Programs 10. Unplug the power cords from electrical outlets I/O address map Appendix C. System address mapsSystem memory map Address range hex Table 2. I/O address map continuedSize bytes DescriptionTable 2. I/O address map continued DMA I/O address mapAddress range hex Size bytesAddress hex Table 3. DMA I/O address map continuedDescription BitsSystem resource Table 4. IRQ channel assignmentsTable 5. DMA channel assignments DMA channel68 User Guide Television output notice Appendix E. Notices and trademarksIBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY U.S.ATrademarks 13, 14, 15 Index A8, 34 23, 34Page Page 1P P/N 25P4024 Part Number 25P4024