Installing a drive
To install a CD drive or DVD drive in bay 2, follow these steps.
1.Remove the cover (see “Removing the cover” on page 17).
2.If the drive you are installing is a
3.Remove the metal shield from the drive bay by inserting a
4.Make sure the drive is set correctly as the master device. Refer to the documentation that comes with your CD drive or DVD drive for master/slave jumper information.
5.Pivot the drive bay latch handle toward the front of the computer and then pivot the drive bay cage upward, as shown, until it is latched in the up position.
6.Install the drive into the bay. Align the screw holes and insert the two screws.
7.Each integrated drive electronics (IDE) drive requires two cables; a
