Manuals / IBM Partner Pavilion / Computer Equipment / Personal Computer

IBM Partner Pavilion 6343, 6793, 6349 To connect the first IDE CD drive or DVD drive, User Guide

Models: 6823 6794 2292 6350 6825 6795 6792 6790 6791 6349 6793 6343

1 86

Download 86 pages 56.68 Kb

Page 48

To connect the first IDE CD drive or DVD drive

vIf it is the first CD drive or DVD drive, set as a master device.

vIf it is an additional CD drive or DVD drive, set as a slave device.

Refer to the documentation that comes with your drive for master/slave jumper information.

7.Install the drive into the bay. Align the screw holes and insert the two screws.

8.Pivot the drive bay cage back into place.

9.Each integrated drive electronics (IDE) drive requires two cables; a four-wire power cable that connects to the power supply and a signal cable that connects to the system board.

The steps to connect an IDE drive are different depending on the type of drive you are connecting. Locate the procedure below for your drive connection.

To connect the first IDE CD drive or DVD drive

1.Locate the three-connector signal cable that came with your computer or with the new drive.

2.Locate the secondary IDE connector on the system board. See “Identifying parts on the system board” on page 30.

36User Guide

Image 48

IBM Partner Pavilion 6343, 6793, 6349, 6791, 6790, 6792, 6795, 6825 To connect the first IDE CD drive or DVD drive, User Guide

Contents

User Guide Type 2292, 6343, 6349 Type 6790, 6791, 6792, 6793, 6794 TypePage User Guide Type 2292, 6343, 6349 Type 6790, 6791, 6792, 6793, 6794 Type 6823First Edition August Contents Index TrademarksSafety Information DANGERTo avoid a shock hazard DANGERLithium battery notice Modem safety informationDanger of explosion if battery is incorrectly replaced Dispose of the battery as required by local ordinances or regulationsLaser compliance statement Consignes de sécurité relatives au modemDANGER L’ouverture de l’unité de CD-ROM/DVD-ROM peut entraîner un risqueAbout this book How this book is organizedInformation resources x User GuideChapter 1. Overview Identifying your computerSmall desktop model computer Desktop model computer Microtower model computer2 User Guide Features System management features varies by model typeInput/output features MicroprocessorPower IBM preinstalled softwareExpansion Operating systems supportedSpecifications Physical specifications - small desktop modelDimensions WeightPhysical specifications - desktop model DimensionsWeight EnvironmentPhysical specifications - microtower model DimensionsWeight EnvironmentAvailable options Tools requiredHandling static-sensitive devices v Prevent others from touching components 10 User Guide Chapter 2. Installing external options Locating the connectors on the front of your computerNote Not all computer models will have the following connectors Locating the connectors on the rear of your computer Chapter 2. Installing external options14 User Guide Mouse connector Obtaining device drivers ConnectorDescription Chapter 3. Installing internal options - small desktop model Removing the coverLocating components Identifying parts on the system board18 User Guide Installing memory Installing DIMMsInstalling adapters What to do nextChapter 3. Installing internal options - small desktop model 3. Remove the support bar by pulling it outward from the computerWhat to do next 22 User GuideInstalling internal drives Drive specificationsInstalling a drive Installing a Rope Clip What to do nextReplacing the cover and connecting the cables What to do next3. Position the cover over the chassis and pivot it down over the computer until it snaps into place 28 User Guide Chapter 4. Installing internal options - desktop model Removing the coverLocating components Identifying parts on the system board30 User Guide Installing memory Installing DIMMsChapter 4. Installing internal options - desktop model Installing adapters What to do next32 User Guide Installing internal drives What to do nextDrive specifications 34 User GuideInstalling a drive To connect the first IDE CD drive or DVD drive 36 User GuideTo connect an additional IDE CD drive or DVD drive To connect an additional IDE hard disk driveInstalling a Rope Clip What to do nextReplacing the cover and connecting the cables What to do next38 User Guide Chapter 4. Installing internal options - desktop model 40 User Guide Chapter 5. Installing internal options - microtower model Removing the coverMoving the power supply Locating components42 User Guide Chapter 5. Installing internal options - microtower model Identifying parts on the system boardInstalling memory Installing DIMMs44 User Guide Installing adapters What to do next4. Install the adapter into the appropriate slot on the system board 5. Install the adapter slot cover latch3. Remove the adapter from its static-protective package 46 User GuideInstalling internal drives Drive specificationsWhat to do next Installing a drive 48 User Guidev If it is the first CD drive or DVD drive, set as a master device To connect the first IDE CD drive or DVD drive 50 User GuideInstalling a Rope Clip To connect an additional IDE CD drive or DVD driveTo connect an additional IDE hard disk drive What to do nextReplacing the cover and connecting the cables What to do next52 User Guide Chapter 5. Installing internal options - microtower model 54 User Guide Chapter 6. Using the IBM Setup Utility program Starting the IBM Setup Utility programViewing and changing settings Exiting from the IBM Setup Utility programAdministrator password Setting, changing, and deleting a passwordErasing a lost or forgotten password clearing CMOS Using Security Profile by Device Other settings in the IBM Setup Utility programThe startup sequence Changing the startup sequence58 User Guide Appendix A. Changing the battery 9. Turn on the computer and all attached devices Recovering from a POST/BIOS update failure Appendix B. Updating System ProgramsSystem programs 10. Unplug the power cords from electrical outlets Appendix C. System address maps System memory mapI/O address map Table 2. I/O address map continued Address range hexSize bytes DescriptionDMA I/O address map Table 2. I/O address map continuedAddress range hex Size bytesTable 3. DMA I/O address map continued Address hexDescription BitsTable 4. IRQ channel assignments System resourceTable 5. DMA channel assignments DMA channel68 User Guide Appendix E. Notices and trademarks Television output noticeIBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY U.S.ATrademarks Index A 13, 14, 158, 34 23, 34Page Page Part Number 25P4024 1P P/N 25P4024