Icom IC-V8 instruction manual Frequency Range Duplex Direction

REPEATER OPERATION 5 ■ Auto repeater USING INITIAL SET MODE

function (USA version only)

The USA version automatically activates the repeater settings (du- plex, ON/OFF, duplex direction, tone encoder ON/OFF) when the operating frequency falls within or outside of the general repeater output frequency range. The offset and repeater tone frequencies are not changed by the auto repeater function, reset these fre- quencies, if necessary.

qWhile pushing [Y]+[Z], turn the power ON to enter INITIAL SET

MODE.

w Push [Y]/[Z] several times until	F SKIP	D	TX
	AO MR
			75
“RPt.” appears.
			50 LM
e Rotate [VOL] to select the desired			25

condition.

•“OF”—the auto repeater function is turned OFF;

“R1”—the auto repeater function acti- vates for duplex only;

“R2”—the auto repeater function acti- vates for duplex and tone.

r Push [#•ENT ] to exit INITIAL SET

MODE.

F SKIP D TX AO MR

75

50 LM 25

F SKIP D TX AO MR

75

50 LM 25

Frequency range and offset direction

FREQUENCY RANGE	DUPLEX DIRECTION
145.200–145.495 MHz	“–” appears
146.610–146.995 MHz
147.000–147.395 MHz	“+” appears

24