Icom IC-V8 instruction manual Programming the memory/call Channels, Memory channel contents

6 MEMORY PROGRAMMING

■General

The transceiver has 100 memory channels (plus 3 pairs of scan edges and 1 call channel) for storage of often-used frequencies.

DMemory channel contents

The following information can be programmed into the memory:

•Operating frequency

•Duplex direction (+ or –) with an offset frequency (pgs. 21, 22)

•Subaudible tone encoder or tone squelch ON/OFF (pgs. 21, 35)

•Subaudible tone and tone squelch frequencies (pgs. 22, 36)

•Skip information* (p. 32)

*Except for scan edge channels.

■Programming the memory/call

channels

qPush [D•CLR] to select VFO mode, if necessary. w Set the desired frequency.

e Set other information such as tone, duplex, etc. as desired.

r Push [C•MR] for 1 sec. (until 3 beeps emitted) after pushing [A•FUNC] to program the information into the displayed memory

channel and return to VFO

• Continue to hold [C•MR] down for 1
sec. after 3 beeps are emitted, to in-	MR
crement the displayed memory chan-
nel number.

25