Icom IC-V8 instruction manual Waiting for call from a specific station, Personal Calls

PAGER/CODE SQUELCH 10

DWaiting for call from a specific station

qSet the operating frequency.

wPush [✱•OPTION] after [A•FUNC] is pushed.

•100 MHz digit shows “P.” e Wait for a call.

•When receiving a call, the caller’s ID or group code appears as shown below.

•DO NOT push any digit keys while code channels C0 to C6 are dis- played, or code channel contents will be changed.

rPush [PTT] to send an answer back call and display the operat- ing frequency.

tAfter confirming a connection push [✱•OPTION] after [A•FUNC] is pushed to select code squelch operation, or repeat previous key operation again to select non-selective calling system.

•PERSONAL CALLS

This display appears when you are called with your ID code and the calling station’s ID code is 123.

•GROUP CALLS

This display appears when you are called with the group code, 888, and 888 has been programmed into code channel C6.

•ERROR INFORMATION

When the transceiver receives an incomplete signal, “E” and previously received code ap- pear.

F SKIPTX MR

CP and flash.

Code channel

F	TX
	MR

FTX

MR

Previously received code.

44