Icom IC-V8 instruction manual DAuto power-off, Repeater lock-out

	OTHER FUNCTIONS 11
DAuto repeater	U.S.A. version only
The auto repeater function automatically turns F		TX

ON or OFF the duplex operation with a speci-		MR
fied shift direction and tone encoder, when the
operating frequency falls within or outside of	F	TX
145.200–145.495, 146.610–146.995 and
		MR

147.000–147.395 MHz range. The offset and repeater tone frequencies are not changed by

the auto repeater function, reset these frequencies, if necessary.

•RPt.OF : The auto repeater function is turned OFF.

•RPt.R1 : Activates for duplex only. (default)

•RPt.R2 : Activates for duplex and tone.

DAuto power-off
The transceiver can be set to automatically	F
turn OFF after a specified period with a beep	MR
when no key operations are performed.
• 30 min., 1 hour, 2 hours and OFF (default)	F
can be specified. The specified period is re-
	AO MR
tained even when the transceiver is turned
OFF by the auto power-off function. To can-

cel the function, select “POF.OF” in this set mode.

DRepeater lock-out

Selects lockout type from repeater, busy and F

TX

TX

TX

OFF.

MR

•RLO.RP : The repeater lockout is turned ON.

•RLO.bu : The busy lockout is turned ON.

• RLO.OF : No lockout is activated. (default)	F
	MR

TX

50