BASIC OPERATION 4
■Receive and transmit
qPush [POWER] for 1 sec. to turn the power ON. w Adjust volume to the desired level.
e Set a frequency.
When a signal is received:
•Squelch opens and audio is emitted from the speaker.
•Signal indicator shows the relative signal strength level.
rPush [9•H/L] after pushing [A•FUNC] to toggle output power be-
tween high and low.
• “L” appears when low output power is selected.
tPush and hold [PTT] to transmit, then speak into the micro- phone.
•“TX” appears.
•Do not hold the microphone too close to your mouth or speak too loudly. This may distort the signal.
yRelease [PTT] to receive.
✔For your information
Monitor function:
Push and hold [SQL] to listen to weak signals that do not open the squelch.
18
