Icom IC-V8 Transmitting a Dtmf code, Transmission speed, Using a Dtmf memory channel

7 DTMF MEMORY

■Transmitting a DTMF code

DUsing a DTMF memory channel

qPush [0•DTMF-M] after pushing [A•FUNC] to enter the DTMF mem-

ory.

wRotate [VOL] to select the desired channel.

ePush [SQL] or [PTT] to exit the DTMF memory mode.

rWhile pushing [PTT], push [SQL] to transmit the selected DTMF memory.

•After the DTMF code is transmitted, the transceiver returns to re- ceive automatically.

DManual DTMF code transmission

While pushing [PTT], push digit keys, A–F to transmit a DTMF code manually.

■ DTMF	USING INITIAL SET MODE
transmission speed

When slow DTMF transmission speeds are required with DTMF memory transmission (as for some repeaters), the transceiver’s rate of DTMF transmission can be adjusted.

qWhile pushing [Y] and [Z], turn the power on to enter INITIAL SET

MODE.

wPush [Y]/[Z] several times until “dtd”

appears.

MR

e Rotate [VOL] to select the desired DTMF transmission speed.

• Four speeds are available: “1” (100
msec. intervals) is the fastest; “5” (500		MR
msec. intervals) is the slowest.
r Push [#•ENT	] to exit INITIAL SET
MODE.

29