10 PAGER/CODE SQUELCH
‘ Pager operation Optional
DCalling a specific station
qProgram the desired code channel in advance (p. 41). w Set the operating frequency.
•Set the AF and squelch to the desired level as in normal operation.
e Push [✱•OPTION] after [A•FUNC] is pushed. | F | TX |
• Pager mode is selected. |
| MR |
|
|
• 100 MHz digit shows “P.”
rSelect the desired transmit code channel:
➥Push [8•SET] after [A•FUNC] is pushed.
➥Rotate [VOL] to select the desired code channel.
➥Push [#•ENT ] to return to previous condition. t Push [PTT] to transmit the pager code.
y Wait for an answer back.
• When the transceiver receives an answer back code, the function display shows the other member’s ID or group code.
u After confirming a connection push [✱•OPTION] after [A•FUNC] is pushed to select the code squelch operation, or repeat the pre- vious key operation again to select
• DO NOT push any digit keys while code channels C0 to C6 are dis- played, or code channel contents be changed.
i Communicate with the other party as normal: push [PTT] to transmit; release to receive.
43