10 PAGER/CODE SQUELCH
‘Code squelch
Optional UT-108 required
Code squelch provides communications with quiet standby since you will only receive calls from stations which know your ID or group code. Each push of [PTT] sends a
qSet the operating frequency.
• Set the AF and squelch to the desired level as in normal operation.
w Push [✱•OPTION] after [A•FUNC] is pushed. | F | TX |
• Repeat several times, if necessary. |
| MR |
|
|
• Code squelch mode is selected.
• 100 MHz digit shows “C.”
eSelect the desired transmit code channel:
➥Push [8•SET] after [A•FUNC] is pushed.
➥Rotate [VOL] to select the desired code channel.
➥Push [#•ENT ] to exit code set mode.
rOperate the transceiver in the normal way (push [PTT] to trans- mit; release [PTT] to receive).
tTo cancel the code squelch, push [✱•OPTION] after [A•FUNC] is pushed.
•100 MHz digit shows “1” when the function is cancelled.
45