Icom IC-V8 instruction manual Channel name programming, Memory transferring, Memory/call VFO

MEMORY PROGRAMMING 6

■Channel name programming

qSelect a “Channel Name Indication” type in INITIAL SET MODE (pgs. 20, 51).

wPush [C•MR] to select memory mode, if necessary.

ePush [8•SET] after pushing [A•FUNC] to enter into the channel

name programming mode.

•The character to be edited flashes. r Rotate [VOL] to select a character.

t Push [Y] to move to the right, [Z] to move to the left.

•Up to characters can be used for channel name.

•Usable characters are; A–Z, 0–9, ”space“, +, –, =, ✱, /, [, and ]

yPush [#•ENT ] to fix and exit the channel name programming mode.

■Memory transferring

Memory (call) channel contents can be transferred to the VFO or to another memory channel.

DMemory/call ➾ VFO

qSelect the memory (call) channel to be transferred:

Push [C•MR] ([B•CALL]) to select memory (call) mode. Push [Y]/[Z] to select the memory channel.

•When “dial” is assigned [VOL], rotate [VOL] to select the memory channel. (p. 51)

wPush [C•MR] for 1 sec. after pushing [A•FUNC] to transfer the se- lected memory contents to the VFO.

• VFO mode is selected automatically.

26