Manuals / Icom / Marine Equipment / Marine Radio

Icom IC-V8 instruction manual Foreword

Models: IC-V8

1 68

Download 68 pages 36.59 Kb

Page 4

FOREWORD

Thank you for purchasing the IC-V8 FM transceiver. This trans- ceiver is designed for those who require quality, performance and outstanding reliability under the most demanding condi- tions.

IMPORTANT

READ ALL INSTRUCTIONS carefully and completely before using the transceiver.

SAVE THIS INSTRUCTION MANUAL–This instruction manual contains important operating instructions for the transceiver.

EXPLICIT DEFINITIONS

The explicit deﬁnitions below apply to this instruction manual.

	WORD	DEFINITION
	RWARNING	Personal injury, fire hazard or electric
	RWARNING	shock may occur.

	CAUTION	Equipment damage may occur.
	NOTE	If disregarded, inconvenience only. No risk
	NOTE	of personal injury, ﬁre or electric shock.
		of personal injury, ﬁre or electric shock.

iii

Image 4

Icom IC-V8 instruction manual Foreword

Contents

IV8 Safety Training Information Page Foreword Supplied Accessories Precaution For USA only Table of Contents Cloning 13 Optional Unit 14 Specifications 15 Options Memory ProgrammingDtmf Memory Scan Operation‘ Switches, controls, keys and connectors Power Switch PowerPTT Switch PTT MicrophoSquelch Switch SQL Antenna ConnectorUP/DOWN Keys Y/Z SP/MIC JackKey pad KEY FunctionPanel Description Key pad Panel Description ‘ Function display Signal Indicator 0LOW Power IndicatorAntenna ‘ Accessory attachmentBelt clip ‘ Battery pack replacement Battery Packs‘ Battery caution Recycling information U.S.A. only‘ Battery charging DRegular chargingWith the BC-146 About AD-99Rapid charging with the BC-144 Rapid charging with the BC-121+AD-94 #11Battery pack life ‘ Charging Note‘ Battery case optional for some versions Setting a frequency Power onVia the keypad Setting audio/squelch level By other methodsTo set the audio level To set the squelch levelReceive and transmit Selecting call channel Selecting a memory channelKey lock function Using Initial SET Mode Display typeAbout reversed duplex mode GeneralUsing SET Mode Offset frequencyTone information Hz ToneFrequency Range Duplex Direction Memory channel contents Programming the memory/call ChannelsMemory transferring Channel name programmingMemory/call VFO Clearing a memory Memory/call call/memoryProgramming a Dtmf code One of d0 to d4 appearsUsing a Dtmf memory channel Transmitting a Dtmf codeTransmission speed Manual Dtmf code transmissionPriority memory channel watch Scan typesPriority memory channel scan Programmed scan Setting skip channels Memory skip scanMemory or call channel watch Priority watchMemory scan watch Scan resume Condition Operation Recommended tone frequenciesSetting subaudible tones for tone squelch operation Available Ctcss tone frequency list‘ Pocket beep operation Waiting for a call from a speciﬁc station‘ Tone scan PAGER/CODE Squelch Before programming Code channel assignmentCode programming Receive accept/receive inhibit Pager/code squelch operation during channel indicationCalling a speciﬁc station Waiting for call from a speciﬁc station Personal Calls‘ Code squelch Entering set mode Repeater tone frequencyTone squelch frequency Dtcs codeTuning step Scan pause timerFunction key timer LCD backlightTransmission permission Pager/Code squelch channel Optional UT-108 requiredTime-out timer Entering initial set modeKey-touch beep DAuto power-off Repeater lock-outSquelch delay Dtmf speedDial assignment Display typeTuning speed acceleration Power saveLCD contrast Optional HM-75A required ‘ CPU reset DTransceiver-to-transceiver cloning AT Power on Cloning using a PCOptional UT-108 installation Optional UnitSpecifications Options Count on us