Icom IC-V8 Setting audio/squelch level, By other methods, To set the audio level

4 BASIC OPERATION

DBy other methods

Via the [Y]/[Z] keys

Each push increases/decreases the frequency by the selected tun- ing step.

Using the [VOL]

Rotate the [VOL] to increases/decreases the frequency with the se- lected tuning step.

• This function is available when “dial” is assigned with [VOL] in INITIAL

SET MODE (p. 51).

✔For your information

Tuning steps:
The transceiver has 8 tuning steps as follows:
5 kHz	10 kHz	12.5 kHz	15 kHz
20 kHz	25 kHz	30 kHz	50 kHz

•A tuning step is selected in SET MODE. (p. 47)

■Setting audio/squelch level

DTo set the audio level

Rotate the [VOL] to set the desired audio level while receiving the signal.

•When no signal is received, push and hold [SQL] while setting the audio level.

•When “dial” is assigned [VOL], push [Y]/[Z] to adjust the audio out- put level. (p. 51)

DTo set the squelch level

While pushing [SQL], push [Y]/[Z] to set the squelch level.

•The squelch level “1” is loose squelch,“10” is tight squelch.

•When “dial” is assigned [VOL], rotate [VOL] while [SQL] is pushed. (p. 51)

17