Infinite Peripherals 216, KPM-210 nnoitcnuF 84,0edomcilatiffosnruT 94,1edomcilatinosnruT

3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS

KPM210/216

213-

[Description] Sets line spacing to [ n × (vertical or horizontal motion unit)]

inches.

[Notes] • The horizontal and vertical motion unit are specified by

GS P or GS $D0. Changing the horizontal or vertical motion

unit does not affect the current line spacing.

• The GS P or GS $D0 command can change the horizontal

(and vertical) motion unit. However, the value cannot be less

than the minimum vertical movement amount.

• In standard mode, the vertical motion unit is used.

[Default] n = 64

[Reference] ESC 0, ESC 2, GS P or GS $D0

[Example]

n4CSEn4CSE n4CSE n4CSEn4CSE

[Name] Set/reset italic mode

[Format] ASCII ESC 4 n

Hex 1 B 34 n

Decimal 27 52 n

[Range] 0 ≤ n ≤ 1, 48 ≤ n ≤ 49

[Description] Turns italic mode on or off, based on the following values of

nnoitcnuF84,0edomcilatiffosnruT94,1edomcilatinosnruT

[Notes] • The printer can print any character in italic mode.

• When italic mode is turned off by setting the value of n to 0

or 48, the data which follows is printed in normal mode.

• Italic mode can also be turned on or off using ESC !. Note,

however, that the last received command is the effective one.

[Default] n = 0

[Reference] ESC !

[Example]