Infinite Peripherals 216, KPM-210

3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS

KPM210/216

453-

HnLnL SGHnLnL SG HnLnL SG HnLnL SGHnLnL SG

[Name] Set left margin

[Format] ASCII GS L nL nH

Hex 1D 4C nL nH

Decimal 29 76 nL nH

[Range] 0 ≤ nL, nH ≤ 255

[Description] Sets the left margin.

• The left margin is set to [(nL + nH × 256) × (horizontal mo-

tion unit)] inches.

Printable

Left margin Printing area width

[Notes] • This command is enabled only if set at the beginning of the

line.

• If the setting exceeds the printable area, the maximum

value of the printable area is used.

• If the left margin + printing area width is greater than the

printable area, the printing area width is set at maximum

value.

• The horizontal and vertical motion unit are specified by

GS P or GS $D0. Changing the horizontal or vertical motion

unit does not affect the current left margin.

• The GS P or GS $D0 command can change the horizontal

(and vertical) motion unit.

• However, the value cannot be less than the minimum hori-

zontal movement amount and it must be in even units of the

minimum horizontal movement amount.

[Default]

[Reference] GS P or GS $D0, GS W

[Example]