3. PRINTER FUNCTIONS
KPM210/216 583-
When y is set to 0, the default setting value is used.
[Notes] • The horizontal direction is perpendicular to the paper feed
direction.
• In standard mode, the following commands use x or y, re-
gardless of character rotation (upside-down or 90° clockwise
rotation):
QCommands using x : ESC SP, ESC $, ESC \, GS L, GS
W.
RCommands using y : ESC 3, ESC J.
• This command does not affect the previously specified
values.
• The calculated result from combining this command with
others is truncated to the minimum value of the mechanical
pitch or an exact multiple of that value.
[Default] x = 204, y = 408 for the model 204 dpi
x = 300, y = 600 for the model 300 dpi
[Reference] ESC SP, ESC $, ESC \, ESC 3, ESC J, GS L, GS W, GS P
[Example]
SGSGSGSGSGαα
α
αα nn
n
nn
[Name] Enable / disable automatic FULL STATUS back
[Format] ASCII GS αn
Hex 1 D E0 n
Decimal 29 22 4 n
[Range] 0 ≤ n ≤ 255
[Description] Enable / disable automatic full status back.
n specifies the composition of FULL STATUS as follows:
(Tab.A.3)
www.ipcprint.com